Woman holding a baby-blue pearlescent gift box with Japanese diagonal wrapping and a small cream pearl-centered flower

Japanese Gift Wrapping: How to Wrap a Box with the Department Store Method

Learn Japanese gift wrapping with the department store method: diagonal paper folds, tucked corners, and a visible diagonal seam secured with hidden tape. This photo guide shows how to wrap a rectangular gift box, from testing the paper coverage to attaching the finishing decoration.

Watch the Japanese Gift Wrapping Tutorial

Watch the folding motion in the video, then use the photos below to follow each action. The photo guide groups the preparation checks before cutting, so its step numbers differ from the video. Before cutting your paper, test the diagonal starting position and the final overlap.

View the Step-by-Step Guide ↓

What Is the Department Store Method?

The box starts at an angle near a corner of the paper, with one box corner extending beyond the edge. You fold up the near paper corner, tuck in the sides, and close the last flap along a diagonal line. A firm rectangular box makes the edges easier to shape.

Materials You Will Need

  • A closed rectangular gift box
  • Wrapping paper
  • Double-sided tape
  • A craft knife
  • A ruler and pencil for measuring and marking (not shown)
  • A small flower decoration or gift tag (optional)

Use flexible paper that holds a crease without making the corner tucks too bulky. Cut on a protected work surface.

Sample measurements

Box (L × W × H): 6 × 4 × 1.6 inches (15.2 × 10.2 × 4.1 cm).
Paper: 11 × 16.5 inches (27.9 × 41.9 cm).

These sizes belong together. For another box, loosely test all the folds and the overlap while the paper is still attached to the roll, then mark and cut the required sheet.

Japanese Gift Wrapping in 12 Photo Steps

Step 1: Prepare Your Materials

Gather a closed gift box, wrapping paper, double-sided tape, and a craft knife. The photo also shows the optional cream flower decoration used at the end. Have a ruler and pencil ready for measuring and marking; these are not shown.

The demonstration box measures 6 × 4 × 1.6 inches (L × W × H), approximately 15.2 × 10.2 × 4.1 cm.

A gift box, blue wrapping paper, tape, a cutter, and a flower decoration arranged on a wooden table

Step 2: Estimate the Paper Coverage

Unroll the paper and turn the box onto its sides to estimate how much paper will cover the broad faces and the height. Leave the paper attached to the roll for now.

This straight placement is only an initial size check. Test the other direction and the diagonal position in the next two steps before cutting.

Checking the blue wrapping paper against the sides of a rectangular gift box

Step 3: Test the Other Direction

Turn the box across the paper in the other direction, keeping track of the faces that need covering. Leave enough material for the side flaps to reach over the box.

When repeating this check with your own box, keep the sheet attached to the roll until you have also tested the diagonal position below.

Turning the rectangular gift box across blue paper to compare coverage in the other direction

Step 4: Test the Diagonal Position Before Cutting

Place the box diagonally near a paper corner, with three corners on the paper and the fourth extending beyond the paper edge, as shown in the photo.

The demonstration marks a starting clearance of 2.17 inches (about 5.5 cm). Treat this as the sample’s placement reference, not a fixed allowance for every box. Lift the near paper corner onto the box and loosely try the side folds and final overlap. Unroll more paper if a flap falls short.

Positioning the gift box diagonally near a corner of the blue wrapping paper

Step 5: Measure and Cut the Paper

Once the diagonal test works, smooth the paper and mark the cut on the reverse. The sample sheet measures 11 × 16.5 inches (approximately 27.9 × 41.9 cm). Move the box aside and cut along the marked line.

For a different box, use the coverage test to determine the sheet size rather than adding a fixed allowance to these sample measurements.

Smoothing blue wrapping paper flat on a wooden table before cutting it from the roll

Step 6: Smooth the Sheet and Reset the Box

Lay the cut sheet decorative side down and smooth away the curl with your palms. Return the box to the diagonal position you tested before cutting.

Keep the same corner extending beyond the paper edge. Avoid making permanent folds until the box is back in position.

The blue wrapping paper laid flat with 11-inch and 16.5-inch measurement markers

Step 7: Fold the First Corner Over the Box

Bring the paper corner nearest you up and over the box. Keep the paper snug against the box and press a firm crease along the nearest edge.

Hold this first layer in place while leaving the side paper open. Smooth gently from the center outward so the sheet lies flat without pulling hard enough to tear a corner.

Lifting the near paper corner over the gift box and creasing it along the edge

Step 8: Tuck and Fold the First Side

Push the loose side paper inward against the box corner. Let the excess form a triangular flap, lift it, and fold it snugly across the box.

Keep one hand on the first layer while the other hand sharpens the new crease along the box edge. This tuck-and-fold action controls the excess paper and helps the side sit neatly.

Pushing the side paper inward and lifting the first side flap around the box

Step 9: Turn the Box and Fold the Opposite Side

Hold the folded layers against the box as you turn it to reach the next side. Keep the paper close to the surface throughout the movement so the first folds do not spring open.

Tuck the loose paper at the next corner inward, then bring the opposite side flap across. Align the crease with the box edge and smooth the layer flat before moving to the final flap.

Holding the first folds in place while bringing the opposite side flap across the box

Step 10: Fold Under the Final Edge

Bring the last flap across the open face. Fold its raw edge underneath so the visible folded edge runs diagonally across the box, following the sloping closure shown in the photo.

Flatten the turned-under edge before fixing it. This fold creates the visible diagonal seam on the finished gift; keep it straight and smooth out any bunching at the corners.

Aligning the final blue paper flap and smoothing it over the wrapped gift box

Step 11: Secure the Wrap with Hidden Tape

Lift the last flap, as shown. Place a small piece of double-sided tape beneath the overlap, peel off its backing, then lower the flap and press it closed.

The tape stays hidden between the layers. The diagonal folded seam remains visible as part of the design.

Lifting the final paper flap on the wrapped box before placing tape underneath

Step 12: Decorate and Finish

Check the wrapped box from all sides and smooth small wrinkles gently. If you are using an adhesive decoration, remove its backing, position it on the box, and press gently to attach.

The example uses a cream flower accent against pale blue paper. You can also leave the diagonal folds undecorated or add a small gift tag. Keep the accent proportionate to the box so the folded paper remains visible.

Finished blue gift box with a clean diagonal fold and a cream flower decoration

Fixing Common Folding Problems

  • A flap does not reach: stop during the loose fit test and unroll more paper before cutting.
  • A corner looks bulky: reopen that side and push the loose paper inward against the corner before lifting the triangular flap.
  • The first fold opens while turning: pin the folded layers against the box with one hand as the other hand turns it.
  • The final seam looks uneven: straighten the turned-under edge and smooth the overlap before peeling off the tape backing.

Choose a Finish for the Occasion

The pale blue paper and cream flower give this gift a soft finish. For Christmas, a small seasonal tag can replace the flower while leaving the diagonal fold visible. Decoration is optional; the folded paper and hidden tape complete the wrap.

For another folding style, try our kimono-style gift wrapping tutorial. If you are practicing the basics, start with the beginner’s gift wrapping guide.

Frequently Asked Questions

How much paper do I need for Japanese gift wrapping?

The sample uses an 11 × 16.5-inch sheet for a 6 × 4 × 1.6-inch box. There is no single sheet size for every box. Test the diagonal layout, side folds, and final overlap before cutting.

Should one box corner extend beyond the paper?

Yes. In the starting position shown here, three box corners sit on the paper and one extends beyond the edge. Lift the near paper corner onto the box to test the first fold.

Do I need the exact 2.17-inch clearance?

The video shows 2.17 inches (about 5.5 cm) for its sample placement. Use the pictured layout as a guide and test the folds for your own box before cutting.

Is the diagonal seam supposed to be visible?

Yes. The folded edge forms a visible diagonal seam. Double-sided tape is hidden underneath the overlap.

Can I use this method for an irregularly shaped gift?

Place the gift in a firm rectangular or square box first. Straight edges help you control the corner tucks.

Do I need a flower or ribbon?

No. A flower, ribbon, or tag is an optional finishing touch. Keep it small enough to leave the diagonal folds visible.

Finish Your Gift

Once the final flap holds, turn the box over and smooth any small wrinkles. For your next wrapping project, explore our gift wrapping paper sets.

Tags:
Older Post Back to Gift Packaging Resources

Leave a comment

Please note, comments need to be approved before they are published.